top of page

ORION : OUS-4EP-2E

Overview

 

4 Port 10/100Mbps + 2 Port 10/100Mbps Uplink, Supports 250 Meters with 65W PoE.

The OUS-4EP-2E is a 10/100Mbps unmanaged POE switch specially tuned for surveillance solutions, which provides four DATA+POE ports and two data ports for up-link.

Ports 1-4 follow the 802.3af/at standard and support maximum power output of 30w from each port. The POE ports of the switch can automatically detect and supply power to the PD devices that comply with the 802.3af/at standard. In addition, the switch supports auto-negotiating traffic control functions and is compatible with terminal devices of 10Mbps, and 100Mbps.

Orion OUS-4EP-2E is usually used to provide power and data transmission for IP cameras.

 

OUS-4EP-2E adopts a plug-and-play design, which eliminates the need for software configuration, which greatly facilitates the installation and use of digital monitoring and wireless coverage. In particular, the switch provides a set of DIP switches for easy transition between shared or port isolation modes. In the port isolation mode, 1-4 ports cannot communicate with each other but transmit output data only through port 5-6. This mode can effectively suppress the generation of broadcast storms.
IEEE 802.3, IEEE 802.3u, IEEE 802.3af/at PoE compliant.
 Support PoE IP cameras, PoE WIFI AP, and PoE IP phones.
  Flow Control, Full-duplex, IEEE 802.3x, Half-duplex, back pressure.
  One-key Smart, Supports two kinds of working modes (100 Meters POE, Extended
  250 Meters POE VLAN Mode).
  All ports support wire-speed switching and jumbo frame transmission.
  Supports upstream ports' lightning protection.
  Enhanced Dynamic power control to ensure stable output power.
  Enhanced Improved anti-interference capability, to solve problems in the installation of grounding devices.
  Enhanced Reliable short-circuit protection to ensure safety.
  Over-voltage and under-voltage protection.

  • Complies with IEEE 802.3, 802.3i, 802.3u, 802.3x, 802.3q, 802.3af/at specifications.
  •     2*10/100Mbps uplink ports, support for auto-negotiation.
  •     4*10/100Mbps POE ports, support 802.3af/at standard, maximum 30w power output.
  •     PoE power budget 65w.
  •     Ideal for small installations of 4 PoE IP Cameras  
  •     Store-and-Forward transmission mode.
  •     Auto MDI-X function, self-adjusting straight-through line, cross-line connection.
  •     Plug-and-play, simple set up with no software or configuration needed
  •     Quiet operation, energy efficient and sturdy metal case for anywhere quality installation
  •     2K Mac address table
  •     One DIP switch supports port isolation setting and max 250m POE transmission(CCTV mode)
  •     Port status LEDs   
bottom of page